Browse Tag: guitar

British Blues Overdrive Layout

I had discovered an interesting overdrive schematic from BYOC. It’s called the British Blues Overdrive. What I had found interesting is that it uses the VREF voltage from the voltage divider in the Gain, Tone and Volume stages. The British Blues Overdrive is designed very differently than any other overdrive I have. I must say, the BBOD sounds awesome. I made only one change. I have used a 250K potentiometer for the Gain stage instead of the 100K. It’s because I wanted more bite.

I have been using the BBOD after my Boss MT-2 Metal Zone distortion. The BBOD helps to increase the harmonic range when playing. It also broadens the depth of the sound like an OD would. Try it out.

The Spooky Fuzz: A Fuzz Pedal and Ghost Detector

For the Halloween season, I have designed the Spooky Fuzz pedal. The pedal is a Fuzz Face with a EMF Ghost Detector built-in. EMF is an acronym for electromagnetic field, if you are wondering.

How Does the Ghost Detector Work?

The Ghost Detector works by detecting changes in the electromagnetic field caused by ghosts in the surrounding area. The EMF antenna detects any EMF fluctuations caused by ghosts. The EMF detection circuit then measures the fluctuations and will turn on the light when the ghost is detected. If there any fluctuations in the surrounding electromagnetic field, the detector LED will go on. If the light goes on, then RUN!

The EMF Ghost Detector is based on the following schematic.

The Spooky Fuzz Pedal Stripboard Layout

The Spooky Fuzz has an antenna attached to the side.

The Spooky Fuzz in Action
The Spooky Fuzz decorated with stickers found at a local discount store.

Happy Halloween! Have fun making your own Spooky Fuzz!

Ken’s Take On the Wylde Drive – MXR ZW-44 Berzerker Overdrive Clone

Almost a year ago I had made a clone of the MXR ZW 44 Berzerker Overdrive using a layout from Tagboard Effects that didn’t work very well for me. So I had done some research into how the ZW 44 is designed. That had lead me to a forum post at Guitar-Gear.RU where a group of Russian pedal makers developed the schematic for the Wylde Drive. Discovering this post was great. It shed light on how to correctly make the ZW 44 clone.

The Russian Version of the Wylde Drive

This is the Wylde Drive Russian Version layout based on this schematic. I don’t understand why the 4.7 uF capacitor is used in the feedback gain loop in the Darlington transistor? I could not find anything like it in all of the Darlington transistor circuit examples I have researched. But the Russian dude placed it in there.

My Version of the Wylde Drive

My version of the Wylde Drive uses a standard Darlington transmitter follower with the input connecting at the 1.8M resistor. I have eliminated the 102 pF capacitor connecting pins 1 and 2 because it’s not needed. There is a DPDT switch that connects to a clipping board with asymmetrical silicon Zener 1N914 diodes and 3 mm red LED lights. The red LEDs give the drive a very fat sound. The drive works very well. This may be the best overdrive I have. The Wylde Drive saga is over is over for myself.

Wylde Drive

808 Compact Overdrive: The Inner-core of the Tube Screamer

If you get rid of the input buffer, output buffer and tone control of a Tube Screamer, you will still have a great sounding overdrive circuit. That’s what I did making the 808 Compact Overdrive. The overdrive only contains the inner-core of the Tube Screamer using only a single operational amplifier. I had added some passive filtering at the end with a 10N capacitor after the 1K resistor that leads to the output. The frequency cutoff is the same as the Distortion Plus.

My version with a flames graphic.

Big Muff Pi V2 1973 #3 Vero Layout

Recently, I had been reading about the development and history behind the Electro-Harmonix Big Muff Pi to research building my own BMP. It is, most likely, the most historic guitar distortion effects pedal. I recommend reading Kit’s Secret Guitar Page’s Big Muff history and The Big Muff Pi Page’s Evolution of the Big Muff Pi Circuit if you are interested in guitar effects pedals.

The schematic I had based my Vero build on was found on the Evolution page is the “V2 “73” RAMS HEAD BIG MUFF PI – First Circle Face version.” This version uses 10K collector resistors and limiting resistors. The V2
1973 #3 also uses 0.1uF (100N) Mylar film capacitors instead of polarized electrolytic capacitors. The Mylar film capacitors and 10K resistors do not effect the pedals gain at all. Using film capacitors is actually an advantage over electrolytic capacitors.

Big Muff Pi V2 1973 #3 Schematic found on the Big Muff Page

The final result is a great sounding distortion pedal. I recommend giving the build a try.